Troubleshooting

Reconnecting your HubSwitch to your 2.4GHz WIFI

Follow these steps to reconnect your HubSwitch to your 2.4GHz WiFi if you have a new router, or if your WiFi name or password has changed.

Option 1 via your router’s WPS button (If your router has one, some routers have software WPS button, please refer to your router instructions)

1. Press/hold the WPS button on your internet router to activate WPS pairing.
2. Now you have around 3 minutes to go to your HubSwitch and hold the Setup button until it flashes pink.
3. Now wait for 1 minute and your router and HubSwitch should reconnect. You will see a solid green light on the Setup LED.

Option 2

Please follow these steps if option 1 was unsuccessful or your router does not have a WPS button.

1. In the Wunda Home app (singed in on an owner account), press and hold on the system you would like to update the WiFi details.
2. Tap "WiFi Setup".
3. Follow the on screen instructions. Ensure you tap the setup button to get a flashing white light on setup before tapping continue.